Water ingress is one of the leading causes of concrete deterioration in Pakistan’s construction and infrastructure sector. Exposure to rainwater, humidity, chlorides, and environmental pollutants leads to cracking, surface damage, and reduced service life. Aquafin Aquarep is a high-performance penetrating water repellent specifically developed to protect and restore concrete and cementitious substrates without altering their appearance

TDS_AQUAFIN-AQUAREP

.

What is Aquafin Aquarep?

Aquafin Aquarep is a ready-to-use, colorless, nano-based waterproofing agent that penetrates deep into porous substrates. The active ingredients chemically bond with concrete to form a durable hydrophobic barrier, preventing water absorption while remaining vapor permeable

TDS_AQUAFIN-AQUAREP

roof leakage solution



How Aquafin Aquarep Protects Damaged Concrete

Unlike surface coatings, Aquafin Aquarep works from within the substrate:

  • Blocks liquid water penetration

  • Allows trapped moisture to escape

  • Reduces risk of reinforcement corrosion

  • Helps repair micro-cracks (0.2–0.4 mm)

This makes it ideal for preventive protection and rehabilitation projects.

Key Technical Benefits

Aquafin Aquarep offers the following performance advantages

TDS_AQUAFIN-AQUAREP

:

  • Deep nano-level penetration

  • Long-lasting chemically bonded protection

  • Excellent resistance to acids, alkalis, chlorides & carbonation

  • UV, weather, and freeze–thaw resistance

  • Temperature resistance from -50°C to +200°C

  • No change in surface color or texture

Applications in Pakistan

Aquafin Aquarep is widely used for:

  • Bridges, flyovers & overpasses

  • Highway pavements & airport aprons

  • Parking structures & garages

  • Warehouses & cold storage facilities

  • Internal & external concrete walls

  • Roof slabs and exposed concrete surfaces

TDS_AQUAFIN-AQUAREP

Coverage & Consumption

  • Coverage: 4–12 m² per liter (substrate dependent)

  • Packaging: 5L & 24L

TDS_AQUAFIN-AQUAREP

Application Method

  1. Ensure substrate is clean and dry

  2. Apply by spray, brush, roller, or soaking

  3. Saturate surface completely

  4. Wipe excess on dense substrates after 5–10 minutes

  5. Allow natural air drying

  6. Spray with suitable low pressure, 10-15 cm distance away

 

Application temperature: 2°C – 45°C

TDS_AQUAFIN-AQUAREP

 

AEO – Featured Snippet Section (Q&A)

What is Aquafin Aquarep used for?
 Aquafin Aquarep is used to protect concrete and cementitious surfaces from water penetration while allowing vapor transmission.

Is Aquafin Aquarep suitable for exterior concrete?
 Yes, it offers excellent UV, weather, and chemical resistance, making it suitable for exterior applications.

Does Aquafin Aquarep change the appearance of concrete?
 No, it is colorless and does not alter the original look of the surface.